|
A-Arm Construction |
| I will be offering kits to build the jig for making the front suspension. It will include a few key pieces of the a-arms. |
***Click on photo for larger image***
 |
 |
| Base is reinforced with 1" tubing to help keep the plate straight. | Lower a-arm adjustment set to 0" and 0". Mount Attachments welded up. |
 |
 |
| Upper a-arm adjustment set to 0" and 0". Mount Attachments welded up. | Extra components for building a-arms. |
 |
 |
| Cut 1/2 through then bent mount plate. Corners welded. |  |
 |
 |
| Caster carefully measured and applied....the wrong direction. These will have to be re-done. |